Metallurgical complete sets of equipment include mining equipment, blast furnace equipment, sintering equipment, coking equipment, steelmaking equipment, steel rolling equipment and various power machinery equipment, transmission machinery equipment, etc.

Metallurgical production is characterized by continuous, high temperature, high humidity, heavy load and more dust. Metallurgical equipment lubrication is mainly used for lubricating continuous casting machine, sintering machine, steel roller, rolling mill, straightening machine and other bearings and roller.

The main working conditions of these equipment are characterized by high degree of automation, heavy load, high temperature, wide rate range (extremely low and high speed), large equipment size, harsh environmental conditions, and high dust pollution. Therefore, the equipment has a high failure rate and difficult maintenance. And frequent, fast failure of parts, large material consumption, and short service life of the equipment. Therefore, the requirements for lubrication are relatively high.

For example, in the continuous casting process, starting from the sector, there is a large amount of cooling water for the billet and bearings cooling, hot rolling also has a large amount of high-pressure water rushed to the steel plate and bearings, also accompanied by a large amount of water vapor; and sintering, iron, steel, hot rolling and other factories and mines, the air contains a large amount of coke, mineral powder, iron oxide and other dust. This requires the lubrication system not only to have good high temperature resistance and cooling performance, but also to have a good seal to meet the needs of these conditions.

Iron and steel metallurgical machinery and equipment commonly used lubrication methods are dry oil lubrication, thin oil lubrication, oil mist lubrication and oil and gas lubrication. Among them, oil-gas lubrication is rapidly and widely used in the entire metallurgical industry by virtue of its advantages of high lubrication efficiency, low fuel consumption, clean and pollution-free, long bearing life, wide application range, and good oil applicability. It gradually replaced other traditional lubrication methods in the metallurgical industry.

Yantai Huashun is an oil and gas lubrication manufacturer with rich production and sales experience. It can complete the overall turnkey project from on-site investigation, scheme design, product manufacturing, on-site installation to system debugging according to the actual needs of customers.